EasyManua.ls Logo

MIHM-VOGT Tabeo-2/M/Metal-120 User Manual

MIHM-VOGT Tabeo-2/M/Metal-120
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Original Operating Manual
Tabeo Sintering Oven Metal
English
Version 4.0en 10/2018
Friedrich-List-Straße 8
D-76297 Stutensee-Blankenloch
Tel.: +49 (0) 7244 70871-0
Fax: +49 (0) 7244 70871-20
E-Mail: info@mihm-vogt.de

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the MIHM-VOGT Tabeo-2/M/Metal-120 and is the answer not in the manual?

MIHM-VOGT Tabeo-2/M/Metal-120 Specifications

General IconGeneral
CategoryOven
ModelTabeo-2/M/Metal-120
Voltage230 V
Frequency50 Hz
Capacity120L
Temperature Range50-250°C
ThermostatYes
MaterialStainless Steel
Timer120 minutes

Summary

Safety

Risk of burns from hot surfaces

Warning about hot surfaces and necessary precautions.

Incorrect operation

Caution regarding misuse, incorrect connections, and untrained personnel.

Technical description

Conformity

Declaration of conformity with EU directives and harmonised standards.

CE Mark

Information on the CE mark and connected product requirements.

Intended use

Specifies the oven's intended commercial use in dental laboratories.

Technical data

Specifications for dimensions, electrical load, and operating conditions.

Installation

Electrical connection

Guidelines for safe and correct electrical hook-up, including circuit breaker requirements.

Connecting the argon supply

Step-by-step guide for connecting the argon gas supply.

Initial commissioning

Selecting and loading a heating program

Guide to choosing and activating a specific heating program.

Starting/stopping a heating program

How to initiate, run, and pause/resume a heating program.

Programming the heating phases

Steps for setting up individual heating curves and their parameters.

Programming phase temperatures and holding times

Details on defining temperature setpoints and durations for each phase.

Starting a heating program automatically

Guide to using the integrated timer for delayed program start.

Basic settings

Procedure for adjusting factory preset parameters like time and temperature units.

Faults and error messages

Safety

Safety warnings related to electrical hazards and hot surfaces.

Faults

Table listing common faults, their possible causes, and troubleshooting steps.

Error messages

List of error codes, their meanings, and recommended actions.

Decommissioning

Disposal

Procedure for preparing the unit for relocation or final disposal.

Related product manuals