Mikado Logo 690 SX - Main Gear and Tail Boom Assembly

Manual LOGO 690SX - ©Mikado Model Helicopters GmbH - Page 6
4x M3
4x
M3x8
4x M3x3
1x
10x16x0,5
1x
3x16
2x
M2,5x8
4x
M2,5x8
4x
M2,5 Stop
1
3
10x16x0,5
Ø3x16
M3x8
M3x8
M4x12
M4x12
M3 Stopp (4)
M2,5 Stopp
M3x25
M2,5x8
M2,5x8
3x5x4
(7x)
4x
M4x12

2x 3x5x4
2x M3x25
Secure scids using set screws 3x3.
Tighten tooth belt:
Pull tail rotor backwards and tighten screws
4 Main Gear & Tail Boom Assembly
Bag 2 • Bag 3 • Bag 8
Bag 2
Swashplate bag 3
Bag 8
Tighten the pivot bolts
very carefully. Do not
overtighten them, as
they will break off.
Push in tail boom until locked.