3 Stage filtration
PRE-FILTER:
Captures initial large particles
like hair and pet dander
H13 HEPA FILTER:
Captures dust, smoke, pollen
and allergens.
CARBON FILTER:
Eliminates odors and bad smells
Operation instructions
BEFORE OPERATING THE AIR PURIFIER:
1. Carefully remove your air purifier from box and plastic bag.
2. Select a firm, level and flat location for the air purifier.
* For proper air flow, locate the unit at least 1 foot from any wall or
furniture.
* Make sure none of the grills are blocked.
3. Plug the power cord into a right voltage AC outlet.
IMPORTANT: When moving the air purifier, always li the unit firmly by
your hands.
AUTO
FILTER RESET
TURBO
AUTO
888
PM
2.5
H
POWER: Press this button
to power on/o the device.
When the “FILTER RESET” indicator
turns red, replace the filter, press
this button and hold 2 seconds to
reset the filter program.
TIMER: Press this button to
set a timer of 1,2...12 hours
and “H” will light up to indicate
a timer is on. To turn o a timer,
press this button until the screen
shows “- - -” and “H” is o.
SLEEP: Press this button
to enter sleep mode. Fan
speed runs on the lowest setting
and all the indicator lights turn o.
Press any buttons to wake up.
SPEED: There are 4 settings
of air cleaning power. Press
the button to switch between
L(I),M(II),H(III) and Turbo speed.
AUTO: Press this button
to enter AUTO mode. Unit
automatically adjusts fan speed
according to air quality tested by
dust sensor.
AUTO
CHILD LOCK:
Press and hold this button
1 second to turn on child lock to
lock all the settings. Press and hold
to unlock.
Control panel instructions
IbukiUser Manual M A6_01.indd 6-7IbukiUser Manual M A6_01.indd 6-7 06/11/2020 16:1506/11/2020 16:15
To Next Page
Loading...