Product code CCR2004-1G-2XS-PCIe
CPU AL32400 2 GHz
CPU architecture ARM 64bit
CPU core count 4
Size of RAM 4 GB
RAM type DDR4
Storage 128 MB, NAND
Number of 1G Ethernet ports 1
Number of 25G SFP28 ports 2
Operating system RouterOS (License level 6)
Dimensions 170 x 69 x 18 mm
Operating temperature -20°C to +60°C
Max power consumption 25 W
Reset
To reset this device to factory settings you must turn off your PC.
Place the screwdriver or any other metal object into the reset hole, so it
makes contact.
Turn on the PC and hold the screwdriver until both LEDs starts 25G SFP28
flashing RED and then release it, it will reset the RouterOS configuration.
If you Keep holding for more than 5 seconds up to 20 seconds until the red
LEDs turns off, it to make the RouterBOARD look for Netinstall servers.
Included Parts
Operating System Support
The device supports RouterOS software with the version number v7 at or above what is indicated in the RouterOS menu /system resource. Other
operating systems have not been tested.
The device is supported in Linux (minimum kernel 5.15.25) and RouterOS (minimum version 7.x), but it will not be recognized in Windows.
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=bf8e59fd315f
Safety Notice
To Next Page
Loading...
Need help?
General
