To Next PageTo Next Page
Need help?Do you have a question about the Mikrotron EOSENS GE CAMERA and is the answer not in the manual?
General| Brand | Mikrotron |
|---|---|
| Model | EOSENS GE CAMERA |
| Category | Security Camera |
| Language | English |
FCC compliance for Class A digital devices in commercial environments.
Compliance with Class A limits for radio noise emissions in Canada.
Disclaimer: Not for life support systems; user assumes risk for such use.
Statement of conformity with Council Directives 2004/108/EG regarding electromagnetic consistency.
Warning: Opening the camera body will void the warranty.
Indicates the presence of important remarks and warnings marked by symbols.
Lists key features: 1280x1024 CMOS sensor, high sensitivity, GigE Vision interface, fast frame rates.
Explains the shutter mechanism, which clears and transfers charge, preventing geometric distortion.
Compares MC1364 (Monochrome) and MC1365 (Color) models based on features.
Basic usage notes including cleaning lenses and avoiding opening the camera to maintain warranty.
Details the GigE Vision interface for machine vision, enabling high data transfer rates.
Specifies DC supply voltage range (8-24V) and power consumption, with critical warnings.
Explains the meaning of the dual-color LED on the camera backplane for status indication.
Outlines the initial setup sequence: connect cables, screw in lens, power on system.
Explains how to find the serial number and firmware version on the camera or via software.
Describes the PowerUpProfile as camera registers loaded from non-volatile memory after power-up.
Defines the Camera Profile as the current set of parameters, saveable to non-volatile memory.
Details the read-only factory pre-set profiles with resolution and image frequency.
Introduces GenICam commands for parameter changes and lists implemented features like Width, Height, OffsetX.
Explains setting the Region of Interest (ROI) using OffsetX, OffsetY, Width, and Height commands.
Covers commands for setting framerate (AcquisitionFrameRateAbs) and shutter time (ExposureTimeRaw).
Details exposure modes (Timed, TriggerWidth, TriggerControlled) and polarity settings.
Explains image quality adjustments like Digital Gain, Black Level, and FPN correction.
Covers miscellaneous settings such as frame counter, test image, threshold, and firmware version reading.
Explains the microcontroller's bootloader and application program roles.
Describes the FPGA configuration stored in EEPROM and its loading process.
Provides a summary table of technical specifications for MC1364 and MC1365 models.
Guides installation of the eBUS-PureGEV Package and recommends the PureGEV SDK.
Instructs on installing the EBus Optimal Driver or Universal Driver for the network interface card.
