Need help?Do you have a question about the Milesight LoRaWAN EM310-TILT and is the answer not in the manual?
General| Device Type | Tilt Sensor |
|---|---|
| Communication Protocol | LoRaWAN |
| Tilt Measurement Range | ±90° |
| IP Rating | IP67 |
| Battery Life | Up to 10 years |
| Weight | 200 g |
| Frequency Bands | EU868 |
| Battery Type | Lithium battery (3.6V) |
| Installation | Wall-mounted |
| Tilt Measurement Accuracy | ±1° |
Provides a general description of the EM310-TILT as a LoRaWAN tilt sensor for angle measurement.
Lists the main capabilities and advantages of the EM310-TILT sensor.
Details all components provided in the EM310-TILT package.
Illustrates the physical structure of the EM310-TILT, including mounting points and NFC area.
Specifies the physical dimensions of the EM310-TILT sensor in millimeters.
Explains how to use the power button for device power control and reset operations.
Guides on configuring the EM310-TILT using NFC via the Milesight ToolBox mobile application.
Details configuration of LoRaWAN parameters, including join type, App EUI, and App Key.
Instructions on selecting LoRaWAN frequencies and channels to match gateway configurations.
Covers changing fundamental settings like reporting interval and device password.
Guides on defining angle thresholds for triggering alarms and setting alarm reporting.
Details setting initial positions, axis thresholds, and alarm logic for angle detection.
Explains alarm reporting intervals, times, and provides practical examples of threshold triggers.
Step-by-step guide for updating the EM310-TILT firmware using the Milesight ToolBox App.
Instructions for backing up and restoring device configurations using template files.
Methods for resetting the EM310-TILT to its original factory default settings.
Guidance on physically installing the device, including mounting and optimal placement considerations.
Describes the HEX data payload format and structure for sensor data transmission.
Details the initial information reported by the EM310-TILT when it connects to the network.
Explains how battery level and angle data are reported, including data types and examples.
Lists available downlink commands for configuring device parameters like reporting interval and thresholds.
Provides practical examples and detailed breakdowns of using downlink commands for device configuration.
Explains commands for setting alarm conditions and initial positions, with specific examples.
To Next Page
