DMA-80
Quick Start Guide
SETUP YOUR DMA80 evo
Setting up your Milestone DMA-80 evo is simple.
Just follow the following instructions. Once com-
pleted the setup, take some time to read carefully
the User Manual MA213. After the switch on, login
as User or Administrator. In case of use of routine
methods, the User level is enough.
Preliminary steps:
2. Remove the protection foil on the top of the
oven plate.
4. Install the outlet adapter plate taking it from
the blue accessories case.
SG003-003• 2021-04
1. Remove the foam under the pneumatic arm.
3. Remove the strip and screw which holds the
ovens plate.
Quick Start Guides - DMA-80 evo SG03 new.indd 1Quick Start Guides - DMA-80 evo SG03 new.indd 1 20/05/22 08:5220/05/22 08:52
To Next Page
Need help?
General
