Cruise Control Function
This feature allows the operator to engage the ControlFlo™ without continuously
depressing the foot control. This feature is available in the Normal, Turbo and the
STA settings.
To use Cruise Control:
1. Begin ControlFlo™. Listen to beeps.
2. After 4 beeps a voice will say CRUISE. This opens a 5 second window
during which you can activate the cruise control.
3. Immediately remove foot from foot control. Cruise control is engaged and
a voice will say SET.
4. If you do not want to engage cruise control, do not remove foot from foot
control during this window.
5. To disengage cruise control, depress foot control and release or press
firmly for faster speeds.
- 14 -
To Next Page
Loading...
