Multi-Cartridge Feature
This function is useful when a second or third cartridge is required during a single
procedure using the same disposable STA Wand™ and there is no need to
purge air from the handpiece and tubing as it was previously purged. This
operation will save unnecessary loss of anesthetic solution when using more
than one cartridge.
1. While the STA plunger is completely retracted, press the Multi-Cartridge
button. Indicator light will illuminate ON.
2. Remove the empty cartridge and replace with a new full cartridge. Insert
cartridge holder onto unit. (The device will NOT purge itself).
3 Continue injection.
4. STA will default back to Multi-Cartridge OFF mode following the end of the
injection. The Multi-cartridge mode will turn off automatically after 60
seconds if a new cartridge is not attached to the drive unit.
- 16 -
To Next Page
Loading...
