Parts Description
Safety Instructions
PARTS DESCRIPTION
1. Blending cup
2. Cross blade
3. Blade base
4. Motor base
5. Grinding cup
6. Flat blade
7. Blade base
8. Flip-top lid
9. Storage lid
10. Control panel
11. Foot
NOTE: Before using your appliance for the first
me, clean all of the accessories (except for the motor base) in
warm soapy water. Rinse and dry thoroughly.
USE
Cau
on: Make sure the motor base is unplugged from the power source.
1. Place the motor base on a firm, flat, level surface.
2. Fill the blending cup with your ingredients and connect with the cross blade for blending purpose.
Alterna
vely, fill the grinding cup with your ingredients and connect with the flat blade for grinding purpose.
Rotate the blade base on to the cup
ghtly in clockwise direc on. Do not exceed the “MAX” level on the cup.
3. Rotate the cup into the motor base in clockwise direc
on. Make sure the cup is locked firmly.
4. Plug in the appliance.
5. Press “ON/OFF” bu
on to turn on the unit. Press “LOW-HIGH” bu on once, the appliance starts working at
low speed. Press it again, the appliance will work at high speed.
If you want to use pulse fun
on during opera on, press “PULSE” bu on once to let the appliance stop first,
and then press ““PULSE” bu
on again to run the appliance with full speed for 2 seconds. Repeat if needed.
6. A
er use, press “ON/OFF” bu on to turn off the appliance and then unplug it.
NOTE: This product is equipped with 1 safety switch (A) on the motor base. If the blade base is not assembled
correctly, the safety switch will not be ac
vated and the machine will not work when switched on. Do not use
any tools to press the safety switch in order not to cause any damage.
Important!
1. For blending purpose, please cut ingredients into pieces if the food is solid. Assemble the blade base with
the cup
ghtly, otherwise it will leak. Do not s ry solid ingredients only.
2. Please make sure never to put any hard objects in the blender as they could damage the blade or the cup.
Please remove all hard kernels from the fruit before blending.
3. The maximum weight of ingredients in the grinding cup cannot exceed 120g.
1
5
6
7
8
9
10
11
2
3
4
27. Never put the blade on the motor base directly when use.
28. Never put the hot ingredients (above 65˚c) into the cups.
29. Please remove all hard kernels from the fruit before blending.
30. There is overheat protection system in the motor, it will work if the motor
is overheated. You should turn o the power at this time and wait the
machine to cool down completely.
31. Regarding the instructions for cleaning the surfaces which come in
contact with food, speed settings and operating time, please refer to the
below paragraph of the manual.
PLEASE READCAREFULLY
This appliance is not intended for use by children under eight years of age and
by persons with reduced physical,sensory or mental capabilities or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
02 - Parts Description_Nutri1000
To Next Page
Loading...