Product specifications
!
1
2
5
3
6
4
7
1. Indicator light
2. ON/OFF button
3. Backside with magnet
4. Charging port
5. Air vent
6. Wall-bracket with magnet
7. Charging cable USB type C
Please be aware that when the device
is charging, the app will not show any sensor
measurements. While the device is charging the
sensor measurements will be affected by the heat
generated from charging, and will therefore not be
accurate. Once the device is fully charged, the sensor
measurements will reappear in the app, and the
charging cable can stay connected if you prefer
*
!
Get started
1
!
Follow in-app instructions
to connect the device*
2
Download the MillNorway App and create
an account
Sensors need 72 hours for full
calibration and accuracy
*
To Next Page
Loading...