Millbank Talisman TAL/DLS5/3 User Manual (English)

To Next Page

TALISMAN

DYNAMIC LOOP AMPLIFIER SYSTEMS

_______________________________

INSTALLATION GUIDE

Publication Code TAL-DLS-3_TIG Issue 3

TAL/DLS1/3 TAL/DLS5/3

Part No. 7157106 Part No. 7157206

PLEASE NOTE: THIS MANUAL AND THE NOTES CONTAINED HEREIN, IS COPYRIGHT AND MAY NOT BE

REPRODUCED EITHER WHOLLY OR IN PART, IN ANY WAY WHATSOEVER, WITHOUT WRITTEN CONSENT

OF FEDERAL SIGNAL LIMITED.

PUBLICATION OF THIS INFORMATION DOES NOT IMPLY ANY AUTHORITY OR LICENCE FOR THE

UTILISATION IN ANY MANNER, IN ANY COUNTRY, OR ANY PATENTED OR REGISTERED DESIGN

FEATURES, MECHANICAL, ELECTRICAL OR AESTHETIC.

MILLBANK ELECTRONICS

is part of:

FEDERAL SIGNAL LTD

Signal House, Charter Way, Hurdsfield Industrial Estate, Macclesfield, Cheshire, SK10 2NF, England

TEL: +44 (0) 1625 66 66 00 FAX: +44 (0) 1625 611 352 e-mail: millbank@fedsig.co.uk

In the interest of product improvement we reserve the right to change specification or design without notice.

Need help?

Do you have a question about the Millbank Talisman TAL/DLS5/3 and is the answer not in the manual?

Millbank Talisman TAL/DLS5/3 Specifications

General

Brand	Millbank
Model	Talisman TAL/DLS5/3
Category	Amplifier
Language	English

Summary

Installation Precautions

Safe Mains Supply and Earthing

Ensure correct mains connection and proper earthing for safe operation and to prevent audible hum.

Environmental and Ventilation Guidelines

Avoid direct sunlight, heat, humidity, dust, and ensure ventilation slots are unobstructed.

Internal Servicing Safety

Never remove the top cover or make internal adjustments with the AC mains supply connected.

Understanding Induction Loop Systems

Introduction to Hearing Impairment Challenges

Explains how hearing aids struggle with ambient noise and how induction loops improve intelligibility.

The Millbank Dynamic Loop System Features

Details the dual-purpose design for hearing impaired and commentary, with switchable bandwidth and compression.

TAL/DLS System Description and Features

Key System Features Overview

Highlights dual-purpose design, dynamic output, frequency contour, AGC, and compression circuitry.

Indicators and Industry Compliance

Describes LED indicators for signal levels, loop integrity, and compliance with BS6083 & MPT1370.

Current and Conductor Graph

System Design and Installation Checklist

Preparation and Design Steps

Covers tools, noise checks, loop positioning, aspect ratio calculation, and conductor selection.

Installation, Testing, and Configuration

Details temporary installation, initial settings, AGC/limiter setup, and final field strength verification.

Controls and Connections Overview

TAL/DLS1/3 Front and Rear Panel

Identifies front panel controls (Input Level, Tone, Master, Indicators) and rear connections.

TAL/DLS5/3 Front and Rear Panel

Details front panel inputs/controls and rear panel connections for microphone and auxiliary sources.

Setup Procedure and Configuration

Connection Details

Provides wiring instructions for loop, microphone, and auxiliary inputs/outputs.

System Setup and Mode Selection

Guides setting response frequency, AGC/limiter modes for hearing impaired or paging applications.

Millbank Talisman TAL/DLS5/3 User Manual

Table of Contents