Milnor MWT16E5 - Guards and Covers

121 pages

To Next Page

To Previous Page

Page (1 / 2)

PELLERIN MILNOR CORPORATIONPELLERIN MILNOR CORPORATION

BMP160042/2016533A

Covers

MCT12E5, MCT16E5, MCT18E4, MCT27E5

MWT12E/X/J5, MWT16E/X/J5, MWT18E/X4, MWT18J6, MWT27E/X/J5

Main Page

Contents3
Important Safety Instructions5
Safety—Rigid Washer Extractors6
Limited Standard Warranty11
How to Get the Necessary Repair Components12
Trademarks13
Safety Placard Use and Placement - MCR12E5, MCR16E5, MCR18E4, MCR27E5, MCR36E4, MCT12E5, MCT16E5, MCT18E4, MCT27E514
Safety Placard Use and Placement MWR12E5, MWR16E5, MWR18E4, MWR18X4, MWR18J4, MWR27E5, MWR36J4, MWT12E5, MWT16E5, MWT18E4, MWT18X4, MWT18J4, MWT27E516
Guards and Covers18
About the Forces Transmitted by Milnor® Washer-extractors20
Installation Tag Guidelines - MCR & MCT Series Machines22
Installation Tag Guidelines - MWR & MWT Series Machines24
Prevent Damage from Chemical Supplies and Chemical Systems27
Handling and Setting Procedures for Rigid Mount Washer-Extractors32
Service Connections35
1. Service and Maintenance39
- Preventive Maintenance40
- Motor Maintenance45
- Torque Requirements for Fasteners49
2. Drive Assemblies57
- Drive Chart58
- Motor Mount61
3. Bearing Assemblies63
- Bearing Assembly MCR/MCT12E5,16E5,18E4 ; MWR/MWT12E/X/J5,16E/X/J5,18E/X/J464
- Bearing Assembly MWR18X6,J6; MWT18X8,J666
4. Shell and Door Assemblies69
- Servicing the Door to Open it with Power Off or with a Malfunctioning Door Lock70
- Door Assembly and Installation MCT12E5,16E5,18E4; MWT1212E/X/J, MWT16E/X/J5, MWT18E/X4, MWT18J675
- Door Lock Mechanism78
- Door Handle and Lock Actuator81
5. Control and Sensing85
- Coin Acceptor & Vault86
- Level Switch88
- Vibration Safety Switch Adjustments90
- Vibration Safety Switch92
6. Chemical Supply93
- Soap Chute for Coin94
- Soap Chute for E-P One-Touch®97
- Soap Chute for E-P Express® and E-P Plus ® Controllers99
7. Water and Drain101
- Water Inlets MCR/MCT12E5, MCR/MCT16E5, MCR/MCT18E4102
- Water Inlets MWR/MWT12E/X/J5, MWR/MWT16E/X/J5, MWR/MWT18E/X4, MWR/MWT18J6104
- Drain Installation106
8. Dimensional Drawings109
- Dimensional Drawing - MCT12E5, MWT12X5111
- Dimensional Drawing - MCT16E5, MWT16X5112
- Dimensional Drawing - MCT18E4, MWT18E4113
- Dimensional Drawing - Pedestal for (1) MWT12E5/X5/J5114
- Dimensional Drawing - Pedestal for (2) MWT12E5/X5/J5115
- Dimensional Drawing - Pedestal for (4) MWT12E5/X5/J5116
- Dimensional Drawing - Pedestal for (1) MCR16E5, MWT16E5/X5/J5117
- Dimensional Drawing - Pedestal for (1) MCR/MWR/MWT18E4,X4,J4,J6119
- Dimensional Drawing - Pedestal for (2) MCR/MWR/MWT18E4,X4,J4,J6120
- Dimensional Drawing - Pedestal for (4) MCR/MWT/MWT18E4,X4,J4,J6121

Milnor MWT16E5 - Guards and Covers

Table of Contents

Other manuals for Milnor MWT16E5

Related product manuals