Page (1 / 2)
PLAN VIEW
FRONT VIEW
REAR VIEW
C H
Notes:
1. Replace placard immediately, if
removed or unreadable.
2. Approximate locations of
placards are shown. Mounting
holes are provided on machine.
If aluminum placard, use #8
Self-tapping screws.
BMP050019/2018484A
Safety Placard Use and Placement
MCR12E5, MCR16E5, MCR18E4, MCR27E5, MCT12E5, MCT16E5, MCT18E4, MCT27E5, MCR36E4
50
10
30
40 60
20
PELLERIN MILNOR CORPORATION
10
To Next Page
Loading...
