Milnor MWT18E4 - Safety Placard Use and Placement MWR12 E5, MWR16 E5, MWR18 E4, MWR18 X4, MWR18 J4, MWR27 E5, MWR36 J4, MWT12 E5, MWT16 E5, MWT18 E4, MWT18 X4, MWT18 J4, MWT27 E5

Page (1 / 2)
Notes:
1. Replace placard immediately, if
removed or unreadable.
2. Approximate locations of
placards are shown. Mounting
holes are provided on machine.
If aluminum placard, use #8
Self-tapping screws.
PLAN VIEW
FRONT VIEW
REAR VIEW
C H
BMP050050/2018484A
Safety Placard Use and Placement
MWR12E5, MWR16E5, MWR18E4, MWR18X4, MWR18J4, MWR27E5, MWR36J4
MWT12E5, MWT16E5, MWT18E4, MWT18X4, MWT18J4, MWT27E5
PELLERIN MILNOR CORPORATION
3040 60
20
50
10
12