Need help?Do you have a question about the Milwaukee AG 22-230 and is the answer not in the manual?
Measured noise and vibration levels according to EN 60 745, includes sound pressure and power levels.
Information on declared vibration emission levels and factors affecting exposure.
Covers general safety for grinding, sanding, wire brushing, and cut-off operations.
Explains kickback and provides precautions to avoid it during operation.
Specific safety advice for grinding and abrasive cutting-off operations.
Additional safety warnings for abrasive cutting-off and wire brushing operations.
Defines the intended applications and materials for the angle grinder.
Instructions for connecting the tool to the power supply and safety class details.
Explanation of the restart cutout function for safety.
Details on the starting current limiter and smooth start function for power delivery.
Statement of compliance with European standards and directives.
Guidance on keeping ventilation slots clear and using approved parts.
Explanation of symbols used in the manual and on the tool.
Measured noise and vibration levels according to EN 60 745, includes sound pressure and power levels.
Information on declared vibration emission levels and factors affecting exposure.
Covers general safety for grinding, sanding, wire brushing, and cut-off operations.
Explains kickback and provides precautions to avoid it during operation.
Specific safety advice for grinding and abrasive cutting-off operations.
Additional safety warnings for abrasive cutting-off and wire brushing operations.
Defines the intended applications and materials for the angle grinder.
Instructions for connecting the tool to the power supply and safety class details.
Explanation of the restart cutout function for safety.
Details on the starting current limiter and smooth start function for power delivery.
Statement of compliance with European standards and directives.
Guidance on keeping ventilation slots clear and using approved parts.
Explanation of symbols used in the manual and on the tool.
General| Power Input | 2200 W |
|---|---|
| Disc Diameter | 230 mm |
| No Load Speed | 6600 rpm |
| Spindle Size | M14 |
| Weight | 5.2 kg |
| Wheel Diameter | 230 mm |
| Spindle Thread | M14 |
| Power Source | Corded Electric |
To Next Page