4
English
4
TECHNICAL DATA C 12 C
Voltage range 12 V
Quick charge current 3.0 A
Maintaining charge current 500 mA
Battery charging time (Li-ion 1.5 Ah) 30 min
Weight without cable 460 g
WARNING! Read all safety warnings and all
instructions, including those given in the accompanying
brochure. Failure to follow the warnings and instructions may
result in electric shock, fi re, and/or serious injury. Save all
warnings and instructions for future reference.
BATTERY CHARGER SAFETY INSTRUCTIONS
Pay attention to the safety instructions in the attached leafl et.
Do not dispose of used battery packs in the household refuse
or by burning them. MILWAUKEE distributors off er to retrieve
old batteries to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only MILWAUKEE 12 V System chargers for charging
MILWAUKEE 12 V System battery packs. Do not use battery
packs from other systems.
The following battery packs can be charged with the charger:
Battery Voltage
Rated
capacity
No. of
battery cells
M12B 12 V ≤ 1.5 Ah 3
M12BX 12 V ≤ 3.0 Ah 2 x 3
M12B2 12 V ≤ 2.0 Ah 3
M12B3 12 V ≤ 3.0 Ah 3
M12B4 12 V ≤ 4.0 Ah 2 x 3
M12B6 12 V ≤ 6.0 Ah 2 x 3
M12 HB2.5 12 V ≤ 2.5 Ah 3
M12 HB5 12 V ≤ 5.0 Ah 2 x 3
Do not try to charge nonchargeable batteries with the charger.
Do not short-circuit. A battery pack will short-circuit if a metal
object makes a connection between the positive and negative
contacts on the battery pack. Do not place a battery pack near
anything that may cause a short circuit, such as coins, keys, or
nails in your pocket.
No metal parts must be allowed to enter the battery section of
the charger (short circuit risk).
Never break open battery packs and chargers, and store them
only in dry rooms. Keep dry at all times.
Do not touch the product with conducting objects.
Never charge a damaged battery pack. Replace the damaged
battery pack with a new one.
Before use, check the product, cable, and plug for any damage
or material fatigue. Repairs should only be carried out by
authorised service centres.
The product is not intended for use by persons (including
children) with limited physical, sensory, or mental capabilities
or insuffi cient experience and/or knowledge unless they are
supervised by a person who is responsible for their safety or
have been instructed by them in the safe use of the product.
Children should be supervised in order to ensure that they do
not play with the product.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fi re, personal injury, and
product damage due to a short circuit, never immerse your
product, battery pack, or charger in fl uid or allow fl uid to fl ow
inside them. Corrosive or conductive fl uids, such as seawater,
certain industrial chemicals, and bleach or bleach-containing
products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The quick charger can charge MILWAUKEE 12 V batteries.
The product charges batteries for power tools only.
It is not designed for charging IT products.
Do not use the product for any other purpose.
MAINS CONNECTION
Connect only to single-phase AC current and only to the
system voltage indicated on the rating plate. It is also possible
to connect to sockets without an earthing contact as the design
conforms to safety class II.
BATTERIES
Battery packs that have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C reduce the performance of
the battery pack. Avoid extended exposure to heat or sunshine
(risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum lifetime, the battery packs have to be fully
charged, after use.
To obtain the longest possible battery life, remove the battery
pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
● Store the battery pack where the temperature is below
27°C and away from moisture.
To Next Page
Loading...
Need help?
General
