To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee M18 48-59-1806 and is the answer not in the manual?
General| Brand | Milwaukee |
|---|---|
| Model | M18 48-59-1806 |
| Category | Battery Charger |
| Language | English |
Keep this operator's manual for future reference regarding safety and operation.
Understand all instructions for battery packs, chargers, and tools before use.
Charge only Milwaukee M18™™ Li-Ion packs in their designated charger to prevent damage.
Use Milwaukee Li-Ion packs only with compatible Milwaukee Li-Ion tools.
Do not charge or use battery packs in wet, damp, or explosive atmospheres.
Charge battery packs in a well-ventilated area, keeping vents clear.
Handle charger cords carefully to avoid damage and electrical hazards.
Use only properly wired extension cords of the correct gauge when necessary.
Charger is rated for 120 Volt AC only and must be plugged into an appropriate receptacle.
Use only attachments recommended by the manufacturer to avoid risks.
Disconnect charger from power and remove battery packs when not in use.
Take precautions against electric shock, including using a GFCI.
Never burn or incinerate battery packs as they may explode or release toxic fumes.
Avoid using battery packs or chargers that have been dropped or damaged.
Disassembly can cause electric shock, fire, or exposure to chemicals; seek service.
Avoid contact with battery chemicals; flush skin/eyes immediately if contact occurs.
Prevent short circuits by avoiding metal contact with battery terminals.
Corrosive or conductive fluids can cause short circuits and damage.
Store battery packs and chargers in a cool, dry place away from extreme heat.
Use a side handle when using high output or high demand battery packs.
Identifies the various parts of the M18™™ Six-Pack Charger for user reference.
Details technical specifications for the charger and battery packs.
Explains how to use the fuel gauge to determine battery pack remaining run time.
Describes how the battery pack protects itself and the tool under extreme conditions.
Defines the various symbols used on the charger and battery packs.
Guidelines for operating battery packs in below-freezing temperatures.
Proper procedures for maintaining and storing battery packs and tools.
Requirements and considerations for the personal transport of Li-Ion battery packs.
Instructions for environmentally friendly disposal of Milwaukee Li-Ion battery packs.
Guidance on when and how to charge Milwaukee M18™™ Li-Ion battery packs.
Information on how the charger indicates and manages charging hot or cold battery packs.
Details on using generators and inverters to power the charger.
Recommendations for storing and maintaining the battery charger.
Instructions for cleaning charger vents and electrical contacts.
Information that the charger has no serviceable parts and requires service center contact.
Details the warranty terms and conditions for Milwaukee battery packs in the USA and Canada.
Provides contact information and procedures for obtaining warranty service.
Details warranty coverage for products sold in Mexico, Central America, and the Caribbean.
