Milwaukee SAWZALL 6519-30 User Manual

OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
SAWZALL
®
RECIPROCATING SAW
PASSE-PARTOUT SAWZALL
®
SIERRAS SABLE SAWZALL
®
Cat. No.
No de Cat.
6509-31
6519-30
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.

Milwaukee SAWZALL 6519-30 Specifications

General

Model	6519-30
Type	Reciprocating Saw
Power Source	Corded Electric
Voltage	120V
Stroke Length	1-1/8 inches
Orbital Action	No
Variable Speed	Yes
No Load Stroke Rate	0-3, 000 SPM
Cord Length	8 ft
Amperage	12 Amps

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep area clean and lit. Avoid explosive atmospheres. Keep children and bystanders away.

Electrical Safety

Match plugs to outlets. Avoid body contact with earthed surfaces. Protect cord from heat, oil, sharp edges.

Personal Safety

Stay alert, use common sense. Wear eye protection. Prevent unintentional starting.

Battery Tool Use and Care

Recharge only with specified charger. Use only designated battery packs. Keep away from metal objects.

Grounding

Improper grounding risks electric shock. Use a qualified electrician. Do not modify plug.

Extension Cords

Guidelines for Using Extension Cords

Use outdoor-rated cords. Ensure cords are properly wired and in good condition. Protect from damage.

Recommended Minimum Wire Gauge

Table provides wire gauge recommendations for extension cords based on amperes and length.

Assembly

Selecting a Blade

Choose the right type and length of blade for the application. Blades are available for various materials.

Installing and Removing Blades

Instructions for using the Quik-Lok® blade clamp to install and remove blades securely.

Removing Broken Blades

Methods for safely removing broken blade pieces from the Quik-Lok® blade clamp.

Blade Clamp Accessory

Instructions for installing and removing blades using the optional 49-22-5016 blade clamp.

Operation

Impact Protection System

System absorbs impacts, lock-ups, and stalls for durability in demanding applications.

Plunge Cutting

Guide on how to plunge cut into surfaces that cannot be cut from an edge.

Starting, Stopping and Controlling Speed

How to start, stop, and control the tool's speed using the trigger.

General Cutting

Instructions for straight or contour cutting from an edge using the shoe.

Cutting Metals

Tips for cutting metals, including starting holes and using lubricant.

Maintenance

Maintaining Tools

Regular inspection, cleaning, and servicing to ensure safe operation and longevity.

Accessories

Recommended Accessories

Information on using specifically recommended accessories for safety and performance.

MILWAUKEE Service Information

United States Service

Contact information and website for US service and technical support.

Canada Service

Contact information for Canadian service and technical support.

Mexico Service

Contact information and website for Mexico service and technical support.