Other Useful Functions
1
1
3
Useful Function
5
6
3-53
11
Press the key to confirm the value.
12
When you want to terminate this procedure, press the key twice.
Setting Items
Boud rate 1200, 2400, 4800, 9600, 19200, 38400(bps)
Data bits 7, 8(bit)
Parity NON, EVEN, ODD
Stop bits 1, 2(bit)
Handshake
MGL-IIc HARD, ENQACK, X-PRM, SOFT
MGL-Ic1 HARD, XONOFF
Step size
AUTO (MGL-IIc) 0.025 (mm)
AUTO(MGL-Ic1) 0.05 (mm)
MGL-IIc 0.025, 0.01 (mm)
MGL-Ic1 0.05, 0.025, 0.1 (mm)
Close tim
*1
*1. Sets the segmentation of the target data for multiple cut, waiting time before starting division cut or waiting time before
starting sorting output.The setting range is 3 to 60 seconds. If no data is received when the established waiting time has
elapsed after the completion of cutting, the device will judge that one piece of data has completed to enable discrimination
between the completed data and the subse-quent data.
3 to 60 (Seconds)
To Next Page
Loading...
