3-17
1
1
3
Useful Function
5
6
Cut Out Data with Registration Mark
5
Press the jog key or to select [Number of
detected registration marks].
• Set values: OFF, 1pt, 2ptA, 2pt B, 3pt, and 4pt
6
Press the key.
• In case you selected “OFF” in Step 5, proceed to Step 11.
7
Press the jog key or to select the following
items.
• The following items are provided for the setting of registration mark detection:
Scale compensation, registration mark size, offset A, offset B, form of registration mark, number of
continuous cutting in direction A, number of continuous cutting in direction B, high speed limit, skew
check, detect mode and sensor level
• See pages P.3-18 through P.3-20 for the contents of each setting item.
8
Press the key.
9
Press the jog key or to select the set
values.
• See pages P.3-18 through P.3-20 for the contents of each setting item.
10
Press the key to confirm the value.
イ
11
When you want to terminate this procedure,
press the key twice.
To Next Page
Loading...
