3-45
1
1
3
Useful Function
5
6
Change the cutting (plotting) order
2
Press the jog key or to select [SET UP] .
3
Press the key.
4
Press the jog key or to select [SORTING] .
5
Press the key.
6
Press the jog key to select “ON” .
7
Press the key.
8
Press the jog key or to select the setting of
[AUTO FEED] .
• Select “ON” for performing AUTO FEED.
9
Press the key.
10
Press the jog key or to select the setting of
[AREA].
• Setting values : OFF or 10 to 5,100cm (in 10cm increment)
11
Press the key for setting, and press the key.
Reset the Setting of SORTING.
• The setting values are kept in memory even when the power is turned off.
• Changing the setting value will clear the data in the receiver buffer.
• Setting the sorting function to ON will decrease the size of the receiver buffer to about 20 MB.
Follow the Steps 1 to 5
of “Set SORTING .”
Press the jog key
to select
“OFF.”
Press the
key.
Press the
key twice.
To Next Page
Loading...
