MIMAKI CG-60AR - Page 126

Chapter 4 Helpful Tips
126
l
Set the email address and subject.
1
Press the [FUNCTION] key in local mode.
2
Use to select [SET UP], then press the [ENTER/HOLD] key.
3
Use to select [EVENT MAIL], then press the [ENTER/HOLD] key.
4
Use to select [Mail Addr.], then press the [ENTER/HOLD] key.
• The [Mail address] screen is displayed.
5
Use to set the email address, then press the [ENTER/HOLD] key.
• Set the email address to which event emails are to be sent.
• Not exceeding 96 alphanumeric characters or symbols
6
Use to select [Subject], then press the [ENTER/HOLD] key.
• The [Message subject] screen appears.
7
Use to set the message subject, then press the [ENTER/HOLD] key.
• Set the text to be used as the event email subject.
• Not exceeding 8 alphanumeric characters or symbols
8
Press the [END] key several times to exit.
l
Set the server.
1
Press the [FUNCTION] key in local mode.
2
Use to select [SET UP], then press the [ENTER/HOLD] key.
3
Use to select [EVENT MAIL], then press the [ENTER/HOLD] key.
4
Use to select [Server], then press the [ENTER/HOLD] key.
5
Set [SMTP Addr.], [SMTP Port], [Sender Adr.], and [Auth.], then press the [ENTER/HOLD] key.
• For more information on the individual items, refer to "Event email setting item list"(P. 124).
6
If "OFF" is selected for [Auth.], press the [END] key several times to exit.
7
Set [User Name], [Pass Word], [POP3 Addr.], and [APOP], then press the [ENTER/HOLD] key.
• For more information on the individual items, refer to "Event email setting item list"(P. 124).
• [POP3 Addr.] and [APOP] are displayed when "POP before SMTP" is selected for [Auth.].
8
Press the [END] key several times to exit.
Transmit Test
1
Press the [FUNCTION] key in local mode.
2
Use to select [SET UP], then press the [ENTER/HOLD] key.