Chapter 2 Cutting
66
4
Remove the cap.
Installing a Pen
1
Turn the knob screw and loosen the holder presser.
2
Insert the pen holder or pen adapter into the tool holder.
(1) Push the brim of the pen holder or pen adapter against the tool holder.
• Position the pen adapter so that the knob screw is easily accessible.
(2) Push the brim of the pen holder or pen adapter against the holder presser.
Holder presser
Brim
Ensure no gap
remains
3
Secure the pen holder or pen adapter.
• Turn the knob screw and fix the holder presser.
• Failure to fix securely may result in lower quality.
To Next Page
Loading...
