Cutting (plotting)
2-23
2
Basic Operations
Cut off the Sheet (Manual Cutting)
1
Confirm that the plotter is in the local
mode.
2
Enter the sheet feed length by pressing
the jog key
.
• Setting value: 0.1m to 51.0m (0.1m step)
3
Press the key or key.
4
Press the key.
5
Hold the sheet by hand.
• Make sure to hold firmly to avoid the sheet raise
up.
6
Cut the sheet
(1) Push the (A) part of manual cutter down.
(2) Move the carriage and cut.
• When cutting a sheet, be careful for the cutter
blade direction. Carriage must be moved to the
direction of able to cut.
To Next Page
Loading...
