MIMAKI CG-60SRIII - Copy the Set Value from the Other User Setting

3-84
Copy the set value from the other user setting.
1
Press the key in the local mode.
2
Press the jog key or to select [SET UP] .
3
Press the key.
4
Press the jog key or to select [CONFIG
COPY].
5
Press the key.
6
Press the jog key or to select the user
setting number to copy.
7
Press the key.
• Copy the setting item of the user selected in the Step 6 to the current user.
8
Press the key two times for terminating this reset operation.
• The setting values are kept in memory even when the power is turned off.
FUNCTION
ENTER/HOLD
ENTER/HOLD
ENTER/HOLD
END