3-15
1
1
3
Useful Function
5
6
Cut Out Data with Registration Mark
Recommended size of the area defined with a set of four registration marks
It is recommended that the size of the area defined with a set of four registration marks is in the range of A4
size (210 mm x 297 mm) to A3 size (297 mm x 420 mm). If you follow this recommendation, you can minimize
wasteful spaces and arrange the designs efficiently.
In case of perform printing a registration mark continuously
When perform printing a registration mark continuously, set the one side of the registration marksize to 8mm. In
case 8mm or shorter registration mark recognized continuously, may cause the glitches on the main unit.
Color of mark
The mark must be printed in black against the white background.
The registration mark will not be detected correctly if the background is not white or the mark is not black.
To Next Page
Loading...
