3-28
8
Press or key to select the scan width.
• Set values: 10 to 30cm
9
Press the key.
10
Press or key to select the search range.
• Set values: 10 to 50cm
11
Press the key.
12
Press the key twice for terminating this function.
• If it is not recognized as a registration mark or there is no response even if the function scans the area
set for search, the message indicating the search failure will be displayed in a certain time.
Then, it will return to the original point and the mode will move to the normal semi-automatic
registration mark detection mode.
To Next Page
Loading...
