vii
Features
The features of the plotter are described below. Together with the method of operation of the plotter explained
in this manual, they help you understand how to use the machine properly.
Mark Sensor
The high accuracy mark-detection sensor enables the plotter to read the mark plotted on sheets automatically,
compensate distances, set the plotting origin and correct paper skew.
Roll Sheet Stopper
The roll sheet stopper helps the plotter feed a roll paper without sagging. In addition, the improved sheet let-off
surface reduces the jam of a roll sheet. Thus the troubles are minimized.
Two Clamp Pressure Modes Changeover Mechanism
The sheet clamp system incorporate two clamp pressure modes changeover mechanism to widen the available
sheet size range.
Strong pressure mode substantially increases the clamp pressure to prevent a long sheet from slipping.
The moderate pressure mode prevents the media from getting scratched by the grit roller during plot operation.
Front Loading
You can mount the roll-placing table in the front side to cut the front-loaded roll sheet.
Plug-in Cutting Software (FineCut) Attached
The plug-in software FineCut, enables easy and fine cutting of the characters or illustrations edited on the
Illustrator or CorelDRAW.
To Next Page
Loading...
