MIMAKI CJV150-107 - 5.1.25 TEST PATTERN

© 2014 MIMAKI ENGINEERING CO.,LTD.
5.1.25 P.1
1
2
3
4
5
6
7
8
R.1.0
MAINTENANCE MANUAL > Test Items > Test Function > TEST PATTERN
Model
CJV150/300
Issued
2014.09.15
Revised F/W ver. Remark
1.0
Rev.
5.1.25 TEST PATTERN
 Function
The test patterns for the drawing evaluation are drawn by the designated times to check the cutting quality, drawing
quality, repeatability and paper displacement or others.
And also the durability evaluation of machine is possible by setting the drawing frequency to the limitless.
Although the drawing is performed according to the size of set paper, it is required to set the cutting area for a roll
sheet.
 Operating procedure
1. Set a pen to the holder.
2. Select [#TEST(CUT)] -> [&TEST PATTERN].
Press the [ENTER] key.
3. Set the drawing frequency then execute the drawing by the
[ENTER] key.
[]/[]: To set Drawing frequency (0, 1~99)
[ENTER]: To start Drawing
[REMOTE]: Stops temporarily (Continued by repressed.)
If the drawing frequency is set to “0”, the drawing is
performed unlimitedly.