MIMAKI CJV150-107 - Page 182

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.2.5 P.2
6.2.5 Pump Motor
1
2
3
4
5
6
7
8
4. Remove the Pump motor Assy connector.
5. Remove the two screws and remove the Pump motor Assy.
6. Remove the Stepping motor.
7. Reverse the disassembly procedure for reassembly.
Connector
Screws
Pump motor
Screw
Do not install the ink tube in the wrong position.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Pump Motor
Model CJV150/300 Issued 2014.09.15 Revised F/W ver 1.00 Remark
1.0
Rev.