MIMAKI CJV150-107 - 6.2.11 Clamp Assy.

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.2.11 P.1
1
2
3
4
5
6
7
8
6.2.11 Clamp Assy.
 Work procedures
1. Turn off the main power supply of the machine.
2. Remove the Front cover M.
3. Lower the clamp lever and set the lever (ON/OFF changing
cam lever) below the clamp assy. to the left.
4. Remove the cam holder from the rear of the printer (screw x2),
and then remove the clamp assy.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Clamp Assy.
Pinch roller
For replacement :YEG-025
Lower lever = Move left
Cam holder
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Clamp Assy.
Model CJV150/300 Issued 2014.09.15 Revised F/W ver 1.00 Remark
1.0
Rev.