MIMAKI CJV150-107 - 6.4.6 CART IO PCB Assy

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.4.6 P.1
1
2
3
4
5
6
7
8
6.4.6 CART IO PCB Assy
 Work procedures
1. Remove the Cartridge cover.
2. Remove the Cartridge IO PCB BKT (screw x4).
3. Remove the CART IO PCB Assy (screw x3).
4. Reverse the disassembly procedure for reassembly.
Turn the main power OFF when turning the power OFF.
It is very dangerous if sleep mode functions mistakenly during the operation.
CARTO IO PCB Assy
Cartridge IO PCB BKT
Screw x4
CART IO PCB
Assy
Screw x3
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > CART IO PCB Assy
Model CJV150/300 Issued 2014.09.15 Revised F/W ver 1.00 Remark
1.0
Rev.