MIMAKI CJV150-107 - 6.4.7 Color LCD PCB Assy.

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.4.7 P.1
1
2
3
4
5
6
7
8
6.4.7 Color LCD PCB Assy.
 Work procedures
1. Remove the Front cover R.
2. Disconnect the cable from PCB, and then remove the KB cover
(screw x3).
3. Remove the screws (x4) and then remove the Color LCD PCB
Assy.
4. Reverse the disassembly procedure for reassembly.
Turn the main power OFF when turning the power OFF.
It is very dangerous if sleep mode functions mistakenly during the operation.
Color LCD PCB Assy
KB cover
Color LCD PCB Assy
KB cover
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > Color LCD PCB Assy.
Model CJV150/300 Issued 2014.09.15 Revised F/W ver 1.00 Remark
1.0
Rev.