MIMAKI CJV150-107 - 6.4.9 ID Contact PCB CN032 Assy

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.4.9 P.1
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > ID Contact PCB CN032 Assy
Model CJV150/300 Issued 2014.09.15 Revised F/W ver 1.00 Remark
1.0
Rev.
6.4.9 ID Contact PCB CN032 Assy
 Work procedures
1. Remove the Cartridges.
2. Remove the Cartridge cover and Cartridge rear cover.
3. Remove the CART IO PCB Assy (screw x4).
4. Remove the connector and loosen the screws to take off the ID
contact PCB CN032 assy.
5. Reverse the disassembly procedure for reassembly.
ID Contact PCB CN032 Assy x8
ID contact PCB CN032 Assy
R.1.0