MIMAKI CJV150-107 - 6.5.2 Paper Sensor

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.5.2 P.1
1
2
3
4
5
6
7
8
6.5.2 Paper Sensor
 Work procedures
1. Remove the Platen cover R160.
2. Remove the Paper sensors from the Paper sensor BKT and
then disconnect the connector.
3. Reverse the disassembly procedure for reassembly.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Paper sensor
Paper sensor
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > Paper Sensor
Model CJV150/300 Issued 2014.09.15 Revised F/W ver 1.00 Remark
1.0
Rev.