© 2014 MIMAKI ENGINEERING CO.,LTD.
6.6.2 P.2
6.6.2 Pen Assy, LED Pointer, Marl Assy.
1
2
3
4
5
6
7
8
3. Disconnect all connectors from the CG common slider PCB
Assy. (x4)
4. Remove the S-guide. (screw x2)
5. Remove the pen assy. (screw x3)
LED pointer, Pen encoder sensor and PR sensor
6. Remove the L sensor BKT C2 and also LED pointer from the
pen assy.
To LED
S guide
Voice coil
To Mark Assy.・
PR・Pen encoder
L sensor BKT C2
LED pointer
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Cutting-related Parts > Pen Assy, LED Pointer, Marl
Model
CJV150/300
Issued
2014.09.15
Revised F/W ver. Remark
1.0
To Next Page
Loading...
