MIMAKI CJV150-107 - Page 26

© 2014 MIMAKI ENGINEERING CO.,LTD.
1.3.6 P.2
1.3.6 Monitoring of the Amount of Remaining Ink
1
2
3
4
5
6
7
8
3 When any of the following events has occurred during
printing, cleaning or filling:
 Cover OPEN
 Lever UP
 Media end
 Updated by the amount of ink consumed before the
occurrence of any of the events shown at left.
4 When any of the following errors has occurred during
printing:
 Cartridge near end
 Cartridge ink end
 Cartridge error
 Updated just after occurrence of the error, not waiting for
writing at the capping pre-operation.
 Updated before replacing the cartridge during printing.
No. Timing for updating Execution conditions
R.1.0
MAINTENANCE MANUAL > Operating Principle > Ink System > Monitoring of the Amount of Remaining Ink
Model CJV150/300 Issued 2014.09.15 Revised F/W ver. 1.10 Remark
1.0
Rev.