MIMAKI CJV150-107 - Chapter 2: Test Printing Procedures; Test Pattern Types and Relationship

© 2014 MIMAKI ENGINEERING CO.,LTD.
2.3.3 P.2
2.3.3 COM16 IO PCB Assy./COM32 IO PCB Assy.
1
2
3
4
5
6
7
8
 Fuse rating
 LED
CN14 8 B8B-ZR NCU control DC
CN15 4 00-8283-0412-00-000 Washing cartridge sensor, near-end DC
CN16 2 B2B-PH-K-S AUX.(Fan) DC Not used
CN17 3 B3B-PH-K-S AUX.(Light) DC Not used
CN18 14 B14B-PHDSS AC PCB control DC
CN19 2 B2B-PH-K-S Heat sink cooling fan1 DC
CN20 Not installed
CN21 2 B2B-XH-2 Ceiling fan DC
CN22 2 B2B-PH-K-S Heat sink cooling fan2 DC
CN23 16 B16B-PHDSS AUX.(Option heater) DC Not used
CN24 6 B6B-PH-K-S AUX.(AD input) DC Not used
CN25 5 B5B-PH-K-S Option fan control DC Not used
CN26 20 5597-20CPB7F Cutter head control DC Not used
CN27 30 30FMZ-BT Head1 COM A DC
CN28 30 30FMZ-BT Head1 COM B DC
CN29 30 30FMZ-BT GND DC
CN30 30 30FMZ-BT Head2 COM A DC Not used for 150 series
CN31 30 30FMZ-BT Head2 COM B DC Not used for 150 series
CN32 2 B2P-VH Power supply input (42V) DC
CN33 3 B3B-ZR Encoder output DC Not used
No Type Intended use Rate Check LED/Remarks
F1 1543.15 Cascade PCB 42V 3.15A D1
F2 154008. +42V power supply input 8A D57
F3 1541.25 +IO5V 1.25A D58
F4 1543.15 +24V 3.15A D60
No Type Intended use Remarks
D1 SML-310VT Cascade PCB 42V check +42V-CAS
D2 SML-310VT +5V power supply input check +5V
D3 SML-310VT Finished writing CPLD data display
D4?D7 SML-310VT FPGA1 debug
D8?D11 SML-310VT FPGA2debug
D57 SML-310VT +42V power supply check +42V-s
D58 SML-310VT +IO power supply(5V) check +IO 5V
D60 SML-310VT +24V check +24V
No Pin Type Intended use AC/DC Remarks
R.1.0
MAINTENANCE MANUAL > Electrical Parts > Circuit Board Specifications > COM16 IO PCB Assy./COM32 IO PCB
Model CJV150/300 Issued 2014.09.15 Revised F/W ver. 1.00 Remark
1.0
Rev.