MIMAKI CJV150-107 - Chapter 2: Setting Cutting Conditions; Understanding Cut Conditions; Selecting the Tool Condition

© 2014 MIMAKI ENGINEERING CO.,LTD.
2.3.11 P.1
1
2
3
4
5
6
7
8
R.1.0
2.3.11 CG common slider PCB Assy
 Outline
Board name: CG common slider PCB Assy. (E107151)
Located on the top of the cutter part slider.
FFC from COM16 IO PCB Assy. or COM32 IO PCB Assy. is connected to this PCB to relay signals to pen head.
PR sensor, mark sensor, LED pointer, etc. are connected to this PCB.
 List of connectors
CN No Pin Connected to: Remarks
CN1 20 COM32 IO PCB Assy.
CN2 2 Voice coil Pen driver output
CN3 4 Pinch roller Solenoid
CN4 12 Mark sensor LED output, sen-
sors (pen encoder, mark sen-
sor, pinch roller)
CN5 2 LED Pointer output
MAINTENANCE MANUAL > Electrical Parts > Circuit Board Specifications > CG common slider PCB Assy
Model CJV150/300 Issued 2014.09.15 Revised F/W ver. 1.00 Remark
1.0
Rev.