MIMAKI CJV150-107 - Cutting Data with Registration Marks; Cutting Workflow Procedures; Registration Mark Input Precautions

© 2014 MIMAKI ENGINEERING CO.,LTD.
4.2.1 P.5
4.2.1 AVERAGING 34 ADJUST
1
2
3
4
5
6
7
8
2. Loosen the screws (x3) for fixing of the Head 1.
3. Referring to the Step 1, move the adjusting lever to adjust the
stagger of the head.
4. Fix the screws (x3) of the Head 1.
5. Repeat the common procedure 2 and the stagger adjustment
procedures 1 to 4 until you can adjust.
6. Move the adjusting lever to the left edge.
Screw (1)
Screw (1)
Screw (1)
Adjusting lever
(for stagger adj.)
Loosen the screws before adjustment in the order of
(1), (2) and (3).
Fix the screws after adjustment in the order of (1), (2)
and (3).
To the left
R.1.0
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > AVERAGING 34 ADJUST
Model CJV150/300 Issued 2014.09.15 Revised F/W ver. 1.00 Remark
1.0
Rev.