MIMAKI CJV150-107 - Chapter 4: Perform SAMPLE CUT; Chapter 4: Cutting Media into Multiple Pieces

© 2014 MIMAKI ENGINEERING CO.,LTD.
4.2.10 P.1
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > HEAD ID
Model CJV150/300 Issued 2014.09.15 Revised F/W ver. 1.00 Remark
1.0
Rev.
R.1.0
4.2.10 HEAD ID
 Outline
HEAD ID represents each head characteristic written at shipping. The variation between heads is unified by inputting
the value to printer.
As this machine reads the head ID from the mounted memory (ROM) on the print head at each startup, it
is not necessary to set the head ID.