MIMAKI CJV150-107 - Chapter 2: Pinch Roller Adjustment; How to Adjust Pinch Roller Position

2-5
2
2
2
2
2
Chapter 2 Basic Operation
Adjusting the Position of the Pinch Roller According to the State of a Media
Adjust the position of the pinch roller according to the width of the media to be set.
This machine feeds the media with a pinch roller and grid roller for printing or cutting.
The pinch roller should be above the grid roller.
How to Adjust the Pinch Roller
Move the pinch roller unit to adjust the position of the pinch roller.
Use the pinch roller guide mark for positioning.
• When setting the media. Do not place the pinch roller that has been removed from the media on the grid roller. (Move the
pinch roller as shown in the illustration “X” in “How to Adjust the Pinch Roller”.) Operating the printer with the media not
gripped between the pinch roller and grid roller could wear the pinch roller out.
Pinch roller
Grit roller
Pinch roller guide mark
To adjust the pinch roller
from the front side:
To adjust the pinch roller
from the rear side:
Pinch roller unit (top view)
Adjust the pinch roller so that the triangle mark comes between the pinch roller guide marks.
Pinch roller unit (rear side)