MIMAKI CJV150-107 - Chapter 2: Media Size and Grit Rollers (CJV150-75)

2-9
2
2
2
2
2
Chapter 2 Basic Operation
Media Size and the Grit Roller (CJV150-75)
The grit roller positions are determined by the size of the media.
• To feed the media smoothly, select the grid roller positions so that the media can be held at equallyspaced intervals.
• When the grid rollers to be used are determined, adjust the pinch roller unit referring to "How to Adjustthe Pinch Roller" of
P. 2-17.
• You can use any number of pinch roller units from 2 to 4.
• Adjust the pinch roller of both ends so that they are within the range of 10cm from media left end and 2cm from media right
end. If adjusting them to the further position, it will remain uncut when cuttingthe media.
Determine the grid rollers to
be used according to the
size of the media.
The right end of the media
should come within this range.
GR : Grit roller