3-22
Chapter 3 NOZZLE CHECK
Setting the Printing Check
Select ON when you want to conduct nozzle check at the
start of online printing.
1
Press the
(MENU) (3 times)
key in LOCAL.
• NOZZLE CHECK MENU will be displayed.
2
Press to select “Printing Check”,
and press the key.
3
Press to select ON, and press the
key.
• The “Check Interval” setting screen will be
displayed.
• “Select OFF to not set nozzle check. Proceed to
Step 11.
4
Press the key.
5
Press to select setting item, and
press the key.
• select the nozzle check interval from “LENGTH”
or “FILE”.
LENGTH: nozzle check is conducted when the
printed length reaches the set length.
FILE: nozzle check is conducted when the
number of printed files reaches the
set number.
6
Press to select setting value, and
press the key.
• The set value will differ according to the setting
selected in Step 5.
LENGTH: 0.1 to 100 m
FILE: 0 to 300 files
7
Press the key twice.
• The “Action” setting screen will be displayed.
8
Press the key.
• “CLEANING TYPE” will be selected.
9
Press to select cleaning type,
and press the key.
Setting value: OFF/SOFT/ NORMAL/ HARD
10
Press to select retry count, and
press the key.
Setting value: 0 to 3
11
Press the key several times to
end the setting.
Setting the NOZZLE RECOVERY
set this if you want to conduct automatic nozzle recovery
when nozzle missing is detected.
1
Press the
(MENU) (3 times)
key in LOCAL.
• NOZZLE CHECK MENU will be displayed.
2
Press to select “NOZZLE
RECOVERY”, and press the key.
3
Press to select ON/OFF, and
press the key.
4
Press the key several times to
end the setting.
Setting the Judgement Condition
Set the conditions for judging nozzle missing.
1
Press the
(MENU) (3 times)
key in LOCAL.
• NOZZLE CHECK MENU will be displayed.
2
Press to select “Judgement
Condition”, and press the key.
3
Press to select color, and press
the key.
4
Press to set the number of
nozzles for judgment, and press the
key.
5
Press the key several times to
end the setting.
• The type of color changes depending on
the ink set.
To Next Page
Loading...
