5-11
5
2
Chapter 5 Maintenance
5
Wipe ink sticking to the side of the head off
with a clean stick.
• Never rub the nozzles.
6
Press the key after the cleaning.
7
Close the maintenance cover, and press
the key.
• After its initial operation, the machine returns to
LOCAL.
Nozzle Recovery Function
NOZZLE RECOVERY: When nozzles missing can not be
improved at specific points, other good nozzles can be
used as alternatives for printing.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press to select “NOZZLE
RECOVERY”, and press the key.
3
Press the key twice.
• Printing of the nozzle pattern will start.
• Select “ENTRY” then “Move to select of the
Nozzle line (Step 4) without drawing a pattern”
4
Select the Nozzle line that needs NOZZLE
RECOVERY by pressing , and
press key.
Clean the side surface of the head
(shown in deep gray) with a clean stick.
The nozzle part (Never
touch it.)
Clean with a clean stick or a waste cloth.
Overhead view
H1-A H1-D H1-E H1-GH1-B H1-C H1-F H1-H
• For 6-color ink sets, the nozzle patterns “H1-B”
and “H1-D” are not printed.
• When using leaf media, set a media of more than
A3 size put horizontally. If a media with narrow
width is set, printing will only be conducted to
midway.
Nozzle pattern
To Next Page
Loading...
