5-13
5
2
Chapter 5 Maintenance
Setting the Refreshing Intervals
The interval between each operation of ejecting a small
amount of ink from the nozzles to prevent nozzle clogging
is set.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press to select “AUTO
MAINTENANCE”, and press the
key.
3
Press to select the “REFRESH”,
and press the key.
4
Press to set the refreshing
interval, and press the key.
• Set value : The set value will differ according to
the ink type being used.
5
Press the key several times to
end the setting.
Setting the Tube Wash Intervals
For setting the interval at which washing of the ink tubes
will be carried out, in order to prevent ink clogging due to
coagulation of ink inside the ink tubes.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press to select “AUTO
MAINTENANCE”, and press the
key.
3
Press to select “TUBE WASH”,
and press the key.
4
Press to set the tube washing
interval, and press the key.
• Set value : The set value will differ according to
the ink type being used.
5
Press the key several times to
end the setting.
Setting the Cleaning Intervals and
Type
The cleaning type and the interval between each cleaning
operation are set.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press to select “AUTO
MAINTENANCE”, and press the
key.
3
Press the several times to select
“Interval” or “Type”, and press the
key.
4
Press to select a set value, and
press the key.
• Set value : The set value will differ according to
the ink type being used.
• Set value of type : SOFT/ NORMAL/ HARD
5
Press the key several times to
end the setting.
• In order to perform tube washing with the
Automatic Maintenance Function, the
maintenance washing liquid needs to be set. If
the maintenance washing liquid is not set, tube
washing operation will not be regularly conducted
and the passage could be clogged.
To Next Page
Loading...
