Chapter 1 Before Use
1-8
Connecting Cables
Connecting USB2.0 Interface Cable
Connect the PC and this machine with the USB2.0
interface cable.
Notes on USB 2.0 Interface
When two or more CJV
150
machines are
connected to one personal computer
When two or more CJV150 machines are connected to
one personal computer, the personal computer may not
recognize all the CJV150 machines normally.
Reconnect the unrecognized CJV150 machine to another
USB port, if available, and check to see if it is
recognized.If the CJV150 machine is not recognized by
the newly connected USB port, use USB 2.0 repeater
cables available on the market.
Notes on peripheral devices in USB high speed
mode
When a peripheral device (USB memory or USB HDD) to
be operated in USB high speed mode is connected to the
same personal computer that a CJV
150
machine is
connected to, the USB device may not be recognized.
When
C
JV150 is connected to the personal computer to which
an external HDD is connected via USB, the speed of data
output to
C
JV150 may drop.That can cause the head unit
to stop temporarily at the right or left end during printing.
Removing USB memory
If a USB memory module is inserted in the personal
computer to which a CJV150 machine is connected, click
"Stop" in the "Safely Remove Hardware" window by
following the instructions given there first and remove the
module.
Leaving a USB memory module inserted can cause
[ERROR 10 COMMAND ERROR].
Copy the data onto the hard disk before outputting it for
printing.
Connecting the power cable
1
Insert the power cable into an inlet of the
machine.
2
Secure a cable band.
• Secure the cable with the cable band attached to
this machine.
3
Insert the power plug into a plug socket.
• Your RIP must be compatible with USB 2.0.
• Contact a RIP maker near your location or our
office when the USB2.0 interface is not attached
to the PC.
• Your RIP must be compatible with USB 2.0.
• Do not use any power cables other than the
attached power cable.
• Be sure to connect the power cable to the outlet
near this machine, and make sure that the power
cable can be easily removed.
• Connect the power cable to the grounded
outlet.Otherwise, it may result in fire or an electric
shock.
To Next Page
Loading...
