Chapter 3 INFORMATION MENU
3-24
INFORMATION MENU table
Displaying the Information
1
Press the
(MENU) (4 times)
key in LOCAL.
• INFORMATION MENU will be displayed.
2
Press to select a information.
• Refer to the “INFORMATION MENU”, and select the information to be displayed.
3
Press the key.
• If you selected [LIST] in step 2, the machine’s settings will be printed.
4
Press the key several times to end the setting.
Item Description
USAGE
WIPING This displays how many wipings have been done.
WASTE TANK
This displays how much waste ink has built up in the waste ink tank, as a rough percentage
of the tank capacity.
PRINT LENGTH This displays the total length of the printing done to date.
PRINT AREA This displays the total area of the printing done to date.
USE TIME This displays the total time for which the machine has been used to date.
Spout Rubber
This displays the total time for which Spout Rubber has been used. (Only displayed when
MBIS is used)
VERSION This displays the version information of this machine.
LIST This allows you to print the settings of this machine.
Ink REPL. Report This prints ink history of this machine.
ERROR HISTORY
This displays the history of errors and warnings to date.
When you press [][], the date of occurrence (year/month/day/hour/minute) and the error/
warning information are displayed alternately in the order of occurrence.
• When you reset the used count of the wiper, press the [FUNC2] key while [RESET?] is displayed. When you press the
[ENTER] key, the number of wipings is reset.
• By pressing the function key during display of “WIPING information,” “WASTE TANK information” and “Spout Rubber” in
USAGE, the used counts can be reset.
When resetting WIPING information: Press the [FUNC2]
When resetting WASTE TANK information: Press the [FUNC1]
When resetting Spout Rubber: Press the [FUNC3]
To Next Page
Loading...
