© 2014 MIMAKI ENGINEERING CO.,LTD. 3.1.1 P.2
3.1.1 Main Unit Specification (for 150 series)
1
2
3
4
Distance
accuracy
Absolute accuracy
±
0.3 mm or
±
0.3% of specified distance, whichever is larger
Excluding test media photo paper
glossy paper contraction and
expansions Excluding initial
meandering
Repeatability
±
0.2 mm or
±
0.1% of specified distance, whichever is larger
Squareness
±
0.5 mm/1000 mm
Media skew 5 mm or less/10 m
Print gap Manual 3 step adjustment(2.0/2.5/3.0) +1mm or +2mm, selection at
install,
Media heater PRE/PRINT/AFTER :60 / 60 / 60
3 system independently control
MCT 2 path installed
UISS Installed
Washing cartridge Installed
NCU (nozzle missing detect) Not installed
Media severing Y-axis cut by head cutter
Severing precision (misalignment) 0.5 mm or less
Cutting tool is an expendable item.
Waste ink tank Bottle type (2000 cc)
Image decompression memory SD-RAM 256MB
Interface Mounted standard USB2.0 * Cable supplied
Ethernet: 100BASE-TX (For output printing status)
Command MRL-IV
MAPS MAPS3
Displayable language Japanese/English
Noise Standby 51 dB or less. (FAST-A, at 1 m from the front, rear, right and left
side of the machine)
During operation 65 dB or less
Discontinuous
operation
75 dB or less
Compliance with standards 1)VCCI class A
2)FCC class A
3)UL 60950-1
4)CE Marking (EMC Directive , Low Voltage Directive and
Machinery Detective)
5)CB report
6)RoHs
REACH, Energy Star
Power supply and power
consumption
AC100 to 120V 1440W or less, AC220 to 240V 1920W or less,
50/60Hz±1Hz
• Input manual switching
• With remote SW function
• With sleep function mode
Inlet1; control + heater
Power consumption 1440W (AC100 - 120V) or less Main unit, including heater
excluding options
Ambient con-
ditions
Service
temperature range
20
C - 35
C Ink discharge stability can drop
under any ambient conditions
exceeding the specified limits.
Relative humidity 35 % - 65 % Rh (no condensation)
Quality assurance
temperature
20
C - 25
C
Temperature
gradient
±
10
C/h or less
Dust
0.15mg/m
3
(Equivalent to the atmosphere in offices)
Option
1)Drying Fan unit (Use separately power supply)
2)Sticking prevention net
3)AMF unit (Standard installed for aq model)
Weight
Main body
126 kg 142 kg 157 kg 168 kg
No legs
100 kg 112 kg 126 kg 136 kg
Packing
167 kg 188 kg 210 kg 225 kg
Item
Specification
Remarks
CJV150-75 CJV150-107 CJV150-130 CJV150-160
R.1.0
Service Documents > Basic Specification > Main Unit Specification > Main Unit Specification (for 150 series)
Model
CJV150
Issued
2014.09.15
Revised F/W ver
Remark
1.0
To Next Page
Loading...
